No matter how careful you are, spills and stains happen. Whether it’s muddy footprints, a glass of red wine, or a pet accident, knowing how to tackle stains quickly and effectively can make all the difference to the appearance and longevity of your floors.
In this guide, we’ll walk you through stain removal methods tailored to wood, tile, and carpet flooring. With the right approach and a few household items, you can lift most stains without damaging your floors.
Stain Removal on Wood Flooring
Wood floors are beautiful but vulnerable to stains especially if the finish is worn or if spills aren’t cleaned up promptly. The key is to act fast and avoid harsh chemicals that can strip the finish.
Water Stains
Water rings or spots are usually surface-level.
How to remove:
- Rub the area gently with a soft cloth and a small amount of mineral oil or mayonnaise.
- Leave it for a few hours or overnight, then buff clean.
- If the stain persists, use a fine-grade steel wool and mineral spirits, following the wood grain.
Pet Stains or Dark Marks
These often penetrate the finish and discolour the wood.
How to remove:
- Lightly sand the stained area with fine-grit sandpaper.
- Apply a solution of equal parts white vinegar and water, then blot with a clean cloth.
- After drying, touch up the area with matching wood stain or sealant.
Grease or Food Spills
These can leave oily marks if not wiped up immediately.
How to remove:
- Sprinkle baking soda over the stain to absorb the oil.
- After a few hours, gently scrub with a soft brush and a mild wood floor cleaner.
- Rinse with a damp cloth and dry immediately.
Important: Always test cleaning solutions in an inconspicuous area first, especially on older or untreated wood.
Stain Removal on Tile Flooring
Tile floors are generally resistant to stains, but grout can be a magnet for grime, and certain spills (like wine or coffee) can leave marks on porous or unsealed tiles.
Grout Stains
Grout is often the first area to show staining.
How to remove:
- Mix baking soda and water into a thick paste.
- Apply to the grout and scrub with a toothbrush or grout brush.
- Let sit for 10–15 minutes before rinsing with warm water.
For stubborn stains, consider using a grout-specific cleaner or a diluted bleach solution (always wear gloves and ventilate the area).
Mould or Mildew
This is common in damp areas like bathrooms.
How to remove:
- Mix equal parts white vinegar and water in a spray bottle.
- Spray onto affected areas and leave for 30 minutes.
- Scrub with a stiff brush and rinse thoroughly.
Food and Drink Stains
On unsealed tiles, certain foods and beverages can leave behind marks.
How to remove:
- Use a pH-neutral tile cleaner and a non-abrasive sponge.
- For tougher stains, mix hydrogen peroxide with baking soda into a paste and apply gently.
- Avoid acidic cleaners like lemon or vinegar on natural stone tiles, as they can cause etching.
Stain Removal on Carpet
Carpet fibres trap dirt, odours and liquids quickly, so the faster you act, the better your chances of a full removal.
General Steps:
- Blot, Don’t Rub – Use a clean, dry cloth or paper towel to blot as much of the spill as possible.
- Work From Outside In – This prevents the stain from spreading.
- Test First – Always test any cleaner on a hidden section of carpet.
Red Wine or Juice
These are classic carpet nightmares, but very treatable.
How to remove:
- Blot the spill immediately with a paper towel.
- Mix two parts water with one part white vinegar and a drop of dish soap.
- Apply to the stain, blot, and repeat if needed.
Sprinkle with baking soda afterwards to absorb remaining moisture and odour, then vacuum.
Pet Accidents
Urine, vomit or faeces require both stain and odour treatment.
How to remove:
- Remove as much as possible with a cloth or scraper.
- Use an enzyme-based pet stain remover, which breaks down organic matter.
- Allow the product to sit as directed, then blot and rinse with warm water.
Grease or Oil
These require something to break down the oil.
How to remove:
- Apply a small amount of rubbing alcohol or dry-cleaning solvent to the stain.
- Blot with a clean cloth, repeating until the stain lifts.
- Rinse with warm water and blot dry.
Prevention Tips for All Flooring Types
- Use mats and rugs at entrances to catch dirt and moisture.
- Clean up spills immediately—the longer a stain sits, the harder it is to remove.
- Protect high-traffic areas with runners or area rugs.
- Consider sealants for wood and tile to add an extra layer of protection.
Say Goodbye to Stains
Every floor type comes with its own set of challenges, but with the right tools and techniques, stains don’t have to be permanent. Acting fast and using the appropriate cleaning method can save your flooring and your peace of mind.
Ready to upgrade to flooring that’s easier to clean and maintain? Browse our full flooring range and discover options built to handle real life.



